Utilities

Make Mugs with Cricut. How to Custom Make a Coffee Mug With Vinyl and Cricut

Make mugs with cricut? How to Custom Make a Coffee Mug With Vinyl and Cricut. It can be difficult to find the right mug for your needs, and even harder to create a custom design that you love.

With the help of the Cricut Maker machine, you can easily create your own personalized mugs in minutes. This machine is easy to use and comes with a variety of built-in designs that you can use as starting points for your own creations.

make mugs with cricut
make mugs with cricut

With 2 minutes of reading the article, Jackie Reeve believes that it will help you step by step to create a satisfactory mug.

Engage the Mug Press function of your Cricut machine

Engage the Mug Press function of your Cricut machine
Engage the Mug Press function of your Cricut machine

To activate your Cricut Mug Press, you will need to use a computer. It won’t take you more than a few minutes, and you’ll end up with the most recent and improved firmware.

Step by step instructions on how to activate your press are provided below.

  1. Open the package containing your Cricut Mug Press.
  2. You should plug the power cable into a wall socket and then connect it to the rear of your press.
  3. After that, attach the USB wire to the rear of your press and plug it into a USB port on your laptop or desktop computer.
  4. Launch Design Space on your personal PC or laptop.
  5. Select “New Machine Setup” > “Heat Press” > “Cricut Mug Press” from the navigation menu on the top left.
  6. Just follow the on-screen instructions.

Customize a ready-to-make mug project

Customize a ready-to-make mug project
Customize a ready-to-make mug project

To get your Cricut Mug Press up and running, you’ll need to use a computer. The process simply takes a few minutes and will update the firmware on your device to the most recent and improved version.

This is a step-by-step guide on how to activate your press.

  1. Remove the packaging from your Cricut Mug Press.
  2. Plug the power cable into an electrical socket and attach it to the rear of your press.
  3. Next, connect the USB wire to the rear of your press and then to the USB port on your laptop or computer.
  4. Launch Design Space on your desktop or laptop computer.
  5. Choose New Machine Setup from the navigation menu on the upper left, then Heat Press, then Cricut Mug Press.
  6. Just follow the instructions that appear on the screen.
See also  Decorate Mugs with Fun and Easy Ideas! 10 Ways to Decorate Mugs

How to Custom Make a Coffee Mug With Vinyl and Cricut? – Top 3 ways to make

Cricut instructions on how to make a vinyl coffee mug

Materials

  • 1 Vinyl coffee mug
  • Cricut Mug Press
  • Design Space software
  • Vinyl transfer tape
  • Scissors

Instructions

  1. Open up Design Space and select “New Project.”
  2. Click on “Upload Images” in the upper left corner of the design canvas and upload the image you want to use for your vinyl coffee mug. Once the image is uploaded, click on it and select “Insert Images.”
  3. With your image selected, click on “Edit” in the upper right corner of the project canvas and then select “Duplicate.” This will create a mirror image of your design so that when you apply it to your coffee mug, it will be facing the right way.
  4. Next, click on “Linetype” in the upper left corner of the project canvas and change the linetype from “Cut” to “Draw.” This will allow you to trace around your image with a pen or pencil so that you can see where you need to cut your vinyl.
  5. When you’re finished tracing your image, connect your Cricut machine to your computer using a USB cable and select “Make It” in the upper right corner of the project canvas.
  6. On the next screen, select “Mirror Images” so that your design will be cut in reverse. Then click “Continue.”
  7. On the next screen, select your vinyl type from the drop-down menu and click “Continue.”
  8. Load your vinyl into your Cricut machine and click “Continue.” Then follow the on-screen prompts to finish cutting your design.
  9. When your design is finished cutting, weed away the excess vinyl using a weeding tool or your fingers. Be sure to leave the negative space of your design intact.
  10. Apply transfer tape to the top of your design and use a scraper tool to smooth it out and remove any bubbles.
  11. Slowly peel away the backing paper from the transfer tape, being careful not to remove your design. If any part of your design comes up with the backing paper, press the transfer tape back down and smooth it out again.
  12. Position your design on your coffee mug and press it down firmly. Then peel away the transfer tape, being careful not to remove your vinyl design.
  13. Place your mug in the Cricut Mug Press and follow the on-screen instructions to heat it up and apply pressure.
  14. Once your mug has cooled, it’s ready to use! Fill it with your favorite hot beverage and enjoy!

Make your own mug project using Infusible Ink Transfer Sheets

Make your own mug project using Infusible Ink Transfer Sheets
Make your own mug project using Infusible Ink Transfer Sheets

Infusible Ink Transfer Sheets are a great way to personalize your coffee mug with a full-color design. To get started, you’ll need to gather a few supplies:

Materials

  • Cricut Mug Press
  • Design Space software
  • Infusible Ink Transfer Sheets
  • Scissors or paper cutter
  • Weeding tool
See also  How To Print On Glass Cups: A Comprehensive Guide for Beginners

Instructions

  1. Open up Design Space and select “New Project.”
  2. Click on “Upload Images” in the upper left corner of the design canvas and upload the image you want to use for your Infusible Ink mug. Once the image is uploaded, click on it and select “Insert Images.”
  3. With your image selected, click on “Edit” in the upper right corner of the project canvas and then select “Duplicate.” This will create a mirror image of your design so that when you apply it to your coffee mug, it will be facing the right way.
  4. Next, click on “Linetype” in the upper left corner of the project canvas and change the linetype from “Cut” to “Draw.” This will allow you to trace around your image with a pen or pencil so that you can see where you need to cut your Infusible Ink sheet.
  5. When you’re finished tracing your image, connect your Cricut machine to your computer using a USB cable and select “Make It” in the upper right corner of the project canvas.
  6. On the next screen, select “Mirror Images” so that your design will be cut in reverse. Then click “Continue.”
  7. On the next screen, select your Infusible Ink sheet type from the drop-down menu and click “Continue.”
  8. Load your Infusible Ink sheet into your Cricut machine and click “Continue.” Then follow the on-screen prompts to finish cutting your design.
  9. When your design is finished cutting, weed away the excess vinyl using a weeding tool or your fingers. Be sure to leave the negative space of your design intact.
  10. Position your design on your coffee mug and press it down firmly. Then peel away the transfer tape, being careful not to remove your Infusible Ink design.
  11. Place your mug in the Cricut Mug Press and follow the on-screen instructions to heat it up and apply pressure.
  12. Once your mug has cooled, it’s ready to use! Fill it with your favorite hot beverage and enjoy!

You can read more at Decorate Mugs with Fun and Easy Ideas! 10 Ways to Decorate Mugs

How to make a mug project with Infusible Ink Markers

How to make a mug project with Infusible Ink Markers
How to make a mug project with Infusible Ink Markers

Infusible Ink markers are a great way to personalize your coffee mug with a full-color design. To get started, you’ll need to gather a few supplies:

Materials

  • Cricut Mug Press
  • Design Space software
  • Infusible Ink Markers
  • Scissors or paper cutter
  • Weeding tool

Instructions

  1. Open up Design Space and select “New Project.”
  2. Click on “Upload Images” in the upper left corner of the design canvas and upload the image you want to use for your Infusible Ink mug. Once the image is uploaded, click on it and select “Insert Images.”
  3. With your image selected, click on “Edit” in the upper right corner of the project canvas and then select “Duplicate.” This will create a mirror image of your design so that when you apply it to your coffee mug, it will be facing the right way.
  4. Next, click on “Linetype” in the upper left corner of the project canvas and change the linetype from “Cut” to “Draw.” This will allow you to trace around your image with a pen or pencil so that you can see where you need to cut your Infusible Ink sheet.
  5. When you’re finished tracing your image, connect your Cricut machine to your computer using a USB cable and select “Make It” in the upper right corner of the project canvas.
  6. On the next screen, select “Mirror Images” so that your design will be cut in reverse. Then click “Continue.”
  7. On the next screen, select your Infusible Ink sheet type from the drop-down menu and click “Continue.”
  8. Load your Infusible Ink sheet into your Cricut machine and click “Continue.” Then follow the on-screen prompts to finish cutting your design.
  9. When your design is finished cutting, weed away the excess vinyl using a weeding tool or your fingers. Be sure to leave the negative space of your design intact.
  10. Position your design on your coffee mug and press it down firmly. Then peel away the transfer tape, being careful not to remove your Infusible Ink design.
  11. Place your mug in the Cricut Mug Press and follow the on-screen instructions to heat it up and apply pressure.
  12. Once your mug has cooled, it’s ready to use! Fill it with your favorite hot beverage and enjoy!
See also  Are Starbucks Plastic Cups Recyclable? What Are Starbucks Plastic Cups Made Of?

Read more Can You Sublimate On A Glass Cup? How to Sublimate on Glass Mugs?

FAQs how to make mugs with cricut maker

What do I need to produce Cricut mugs?

  • A mug of your choice
  • Cricut Explore
  • Cricut Accessories- Scraping tool,adhesive mat
  • Oracal 651 Vinyl
  • Measuring tape
  • Transfer Tape
  • A pair of scissors

Does Cricut vinyl stick to mugs?

Clean the surface of your cup with 91% isopropyl alcohol. This will remove any oil or grime and leave the surface as clean as possible. This ensures that the vinyl decal adheres and remains adhered indefinitely.

Can you use a Cricut to design mugs?

To get started, open up the Mug Design Set up in Cricut Design Space. You can use this as a blank starting point for any design you want. If you find a mug design you like, you can change it up using the Slice, Weld and Attach tools. Or, you can just cut out images and press them on your mug.

What kind of material do you use for the Cricut Mug Press?

Use Cricut cup blanks with Infusible Ink Transfer Sheets and Markers for the best results.

Conclusion

The Cricut Maker is a great tool for making custom mugs. With a few simple steps, you can know how to make a mug with cricut maker, that is perfect for your next party or gift-giving occasion. Cupsplus.net hope this article provide you many useful information. Thanks for reading!

Jackie Reeve

Since 2015, Jackie Reeve has worked at Wirecutter as a senior staff writer about bedding, organizing, and homeware. She formerly worked as a school librarian and for roughly 15 years as a quilter. Her quilt designs and other writings have been published in a number of magazines. Every morning, she gets ready for bed and conducts the Wirecutter staff book club. At the same time, she works as an editor at cupsplus.net

Related Articles

Leave a Reply

Back to top button